SPRO Pellet Pump

The 0,7Ltr capacity Spro Pellet Pump is ideal to prepare expander pellets and/or to add flavours and colours.

The lid features a special vacuum indicator that shows when all air is removed from the container (1.1)

	Vacuum created

This unique pellet pump features two special dials on the lid, indicating the day and the month to show when the content was stored (1.2)

Indication ‘months’	Indication ‘days’

NB: also perfect for keeping fresh casters.

How to Use:

1. Fill the container for 50% or less with expander pellets and add water and any flavouring or colouring you require and fill up to 75% to ensure a good vacuum. Check that the rim of the container, the seal and the stopper are clean before replacing the lid.
   
   
2. Replace the lid and place the pump over the stopper. Commence pumping action. Pump until the vacuum indicator is completely down and level with the lid. The created vacuum inside the container allows the pellets to absorb the liquid better and faster. You should see the bubbles of extracted air on the surface. The seal should now be fully compressed and the pump can safely be removed now.
   
   
3. Release the air after approx. 30 seconds by pulling up the valve. The pellets should sink.
   
   
4. Repeat process as necessary if any floating pellets remain.
   
   
5. Once all pellets sink they are ready to use. Or leave them in the water for somewhat longer depending on how soft you want them to be.

Step 1	Step 2

Step 3	Step 4

Step 5	Step 6